Centrifugal Fans
CAMA-X
Belt driven medium pressure fans, equipped with an electric motor, a standardised set of pulleys, belts and guards according to ISO-13857
Fan:
• Sheet steel casing.
• Backward curved impeller made of highly robust sheet steel, specially designed for dusty air.
• Motor mounted on pedestal with motor slide base.
• With inspection and cleaning hatch from size 560 and up.
• Sizes larger than 1600 will be supplied with split casing to facilitate transport.
• Casing continuously welded from size 710 and up.
• Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +300 ºC.
• Stainless steel fan.
• ATEX certified Category 2.
• Sheet steel casing.
• Backward curved impeller made of highly robust sheet steel, specially designed for dusty air.
• Motor mounted on pedestal with motor slide base.
• With inspection and cleaning hatch from size 560 and up.
• Sizes larger than 1600 will be supplied with split casing to facilitate transport.
• Casing continuously welded from size 710 and up.
• Maximum temperature of air to be carried: -25 ºC +90 ºC.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase with IE4 efficiency for power from 75 kW to 200 kW, except 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +300 ºC.
• Stainless steel fan.
• ATEX certified Category 2.
Products
Price finder
1. Enter the model or
a product code:
a product code:
2. Price of the product
(without VAT):
(without VAT):
PVP: _.___,__ €