Centrifugal Fans
CMP
Single inlet medium pressure centrifugal fans with sheet steel casing and impeller
Fan:
• Sheet steel casing, except models 38-2M and 380 in cast aluminum.
• Forward curved impeller in galvanised sheet steel.
• Maximum temperature of air to be carried: -25 ºC +120 ºC, maximum +100 ºC models 38-2M and 380.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection except single-phase models with IP54 protection. Models 38-2M and 380 with IP21 protection.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
• Models 38-2M and 380: Unpainted casing.
On request:
• Special windings for different voltages, except models 38-2M and 380.
• Fan prepared to transport air up to +250 ºc, except models 38-2M and 380.
• Stainless steel fan, except models 38-2M and 380.
• Category 2 ATEX certification (see CMP/ATEX series), except models 38-2M and 380.
• Models 38-2M and 380: Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
• Sheet steel casing, except models 38-2M and 380 in cast aluminum.
• Forward curved impeller in galvanised sheet steel.
• Maximum temperature of air to be carried: -25 ºC +120 ºC, maximum +100 ºC models 38-2M and 380.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection except single-phase models with IP54 protection. Models 38-2M and 380 with IP21 protection.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
• Models 38-2M and 380: Unpainted casing.
On request:
• Special windings for different voltages, except models 38-2M and 380.
• Fan prepared to transport air up to +250 ºc, except models 38-2M and 380.
• Stainless steel fan, except models 38-2M and 380.
• Category 2 ATEX certification (see CMP/ATEX series), except models 38-2M and 380.
• Models 38-2M and 380: Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
Products
Price finder
1. Enter the model or
a product code:
a product code:
2. Price of the product
(without VAT):
(without VAT):
PVP: _.___,__ €