HCT/IMP-C
Long range, circular, one way or reversible Jet fans
Long range one way or reversible Jet fans with a circular design for air movement and CO extraction in car parks.
Fan:
• Unidirectional or reversible fan assembly consisting of fan, silencers, deflectors and supports.
• Adjustable impeller designed to obtain great thrusts.
• Protection grid against contacts according to the UNE-EN ISO 12499 standard in unidirectional models.
• Deflector for increased air reach, on the outlet side. Reversible models are equipped with deflectors on both sides.
• High attenuation silencers with thermal and acoustic insulation.
• Airflow direction from motor to impeller or 100% reversible.
• Circular casing in painted steel sheet.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection. 1 or 2 speeds depending on the model.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +40 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Thrust performance other than those indicated.
• Version approved for smoke evacuation according to EN 12101-3 standard (see THT/IMP series).
• INT series safety switch built into the fan.
Fan:
• Unidirectional or reversible fan assembly consisting of fan, silencers, deflectors and supports.
• Adjustable impeller designed to obtain great thrusts.
• Protection grid against contacts according to the UNE-EN ISO 12499 standard in unidirectional models.
• Deflector for increased air reach, on the outlet side. Reversible models are equipped with deflectors on both sides.
• High attenuation silencers with thermal and acoustic insulation.
• Airflow direction from motor to impeller or 100% reversible.
• Circular casing in painted steel sheet.
Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection. 1 or 2 speeds depending on the model.
• Three-phase 230/400 V 50 Hz.
• Working temperature: -25 ºC +40 ºC.
Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.
On request:
• Thrust performance other than those indicated.
• Version approved for smoke evacuation according to EN 12101-3 standard (see THT/IMP series).
• INT series safety switch built into the fan.
Products
Price finder
1. Enter the model or
a product code:
a product code:
2. Price of the product
(without VAT):
(without VAT):
PVP: _.___,__ €